Uses Of Marine Epoxy

Marine epoxy is two part adhesive consisting of a resin and a hardener and it is mainly divided into two classes: the quick set epoxy and the slow-set epoxy. The quick sets are normally 1:1 by volume and normally achieve their strength in ten minutes or less and the full cure in a day. Also, they quite often retain some flexibility and resilience. The slow sets or marine epoxy allow more open or working time as their cure can take up to twenty four hours. The advantages provided by this type of marine epoxy are the fact that they have superior strength, water resistance and gap filling ability.

Epoxy cures through a chemical reaction called "exothermic polymerization" which is a heat producing process in which there is little moisture loss. This is in fact the main reason for which marine epoxy is so good in gap filling. But the most important advantage of using marine epoxy is the fact that it joins dissimilar materials. It can join metal, woods and other materials, depending on one's need. In fact, each manufacturer has specifications for the use of the marine epoxy they produce and these instructions need to be followed closely.

The same applies to storage instructions. Unless you carefully store the marine epoxy, it'll be exposed to the risk of hardening. Proper storage implies avoiding excessive heat and contamination with water. Eventually, one thing you should also take care of when working with marine epoxy is the application method for each surface and material there are specific means of applying, which can be by roller, spray gun, trowel, or putty knife. Either way, beware that these products are not so environmentally safe any you have to properly dispose the recipients.

« Back