Pump Maintenance And Repair For Pressure Washers

If your business has anything to do with pressure washers, at one point you will certainly be in need of a pump repair or change. There are several things that you should know before beginning a pump repair. Also, in order for you not to worry about pump failure, you need to study a little on preventive maintenance. If industrial grade, you pressure washer definitely has one of the two different pumps: Cat Pump or General Pump. Even if both are industry standards and General is the leader for sales, there are many who prefer buying Cat Pumps mainly because it sucks better from plastic water tanks.

Before starting your pump repair, here are some facts that will help you in this process. The pump is usually powered by two parallel belts connected to your engine. Make sure that the pump does not lack water. When you see that the water tank is empty, the best thing to do is to turn off the engine, so that the pump does not run without water. It is very important for you to know that starving the pump will burn it out in less than 35 minutes. For the pump repair you should also know that your pump has a safety feature whereby when you are not spraying the water. In this case, the feature will automatically switch on and pass into the tank under the condition that there is enough water for the complete loop. Another thing included in the whole of the pump repair process is the change of the oil. Remember that you should change the oil in the pump at least monthly. When the water rig is on level ground, fill the pump to the red dot on the center of the eyeglass. Don't try to over fill it; that's not such a good idea.

« Back