Basics Of Concrete Driveway Crack Repair

Concrete driveway crack repair is similar to other types of concrete repair. The only difference is that the driveway has to carry more of a weight load, so the concrete crack repair has to be able to withstand that weight. The repaired area must withstand much greater pressure as well, which is something to keep in mind when thinking about concrete driveway crack repair. There are different proportions of materials that are used for the repairs. For most concrete driveway crack repair, you want to use a gravel mix instead of a sand mix. This mixture consists of one part cement, two parts sand, and three parts gravel.

The first step in concrete crack repair is to thoroughly clean and then undercut the crack. Once that is complete, you can brush cement adhesive into the undercut area. When doing this, you should undercut the cracked area to a greater depth and make the cracks considerably wider than when repairing a sidewalk. This is important because the concrete driveway crack repair relies on the added support. This extra depth and width increases the strength of the repair job. With these simple steps taken into consideration, the rest of the concrete crack repair can be followed as if it were any other concrete.

After the gravel mix has been applied, level the new patch mix off with a trowel or float, as you would do when repairing a sidewalk. Concrete driveway crack repair is simple and only requires several small steps. After the crack has been repaired, you can cover the patched are for five or so days, wetting it down once each day. It is important after the concrete driveway crack repair has been repaired that you do not drive an automobile over the patched area for at least a week. This gives the newly patched section time to dry thoroughly before it must carry the heavy load of an automobile or truck.

« Back